1.14 Configure and verify IPv6 Stateless Address Auto Configuration

To use SLAAC on an interface:

Screenshot_2018-08-28_10-42-05.png

Ensure at least one of the routers has an IPv6 address already configured:

R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#ipv6 unicast-routing 
R3(config)#int g1/0
R3(config-if)#ipv6 add 2001:db8::1/64
R3(config-if)#no shutdown 
R3(config-if)#^Z
R3#
*Aug 28 10:43:14.631: %SYS-5-CONFIG_I: Configured from console by console

On the other router:

R4#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R4(config)#ipv6 unicast-routing 
R4(config)#int g1/0
R4(config-if)#ipv6 address autoconfig 
R4(config-if)#no shutdown
R4(config-if)#^Z
R4#

To verify:

R4#show ipv6 int g1/0
GigabitEthernet1/0 is up, line protocol is up
IPv6 is enabled, link-local address is FE80::C804:2CFF:FEB4:1C 
No Virtual link-local address(es):
Stateless address autoconfig enabled
Global unicast address(es):
2001:DB8::C804:2CFF:FEB4:1C, subnet is 2001:DB8::/64 [EUI/CAL/PRE]
valid lifetime 2591921 preferred lifetime 604721
Joined group address(es):
FF02::1
FF02::2
FF02::1:FFB4:1C
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ICMP unreachables are sent
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds (using 26456)
ND advertised reachable time is 0 (unspecified)
ND advertised retransmit interval is 0 (unspecified)
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
ND advertised default router preference is Medium
Hosts use stateless autoconfig for addresses.
R4#

 

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s